Signed in as:
filler@godaddy.com
Even small pricks can cause big problems.
Even small pricks can cause big problems.
U.S. and international patents pending.
All the same comfort with increased safety, NopoGuard seamlessly integrates into your existing workflow so there’s no need to adopt new instruments or equipment.
Engineered to meet FDA’s requirements, NopoGuard gives you the confidence you need when delivering critical patient care, all while providing superior infection control for you and your team.
Each NopoGuard can be sterilized and reused a minimum of 250 times, saving you money, reducing time spent on ordering, and minimizing your practice waste.
Safety made simple. Watch this quick video to learn about the NopoGuard needle safety device.
Everything you need to know about NopoGuard. Watch this video to learn more and see it in use.
NopoGuard was developed by Dental Products Lab to address an unmet need in everyday dentistry. The CDC estimates that 600,000 to 800,000 needlestick injuries occur each year, with many more injuries unreported. Needlestick injuries expose workers to a number of bloodborne pathogens that can cause serious or fatal infections. Because occupational exposure to bloodborne pathogens from accidental sharps injuries in dentistry continues to be a serious problem, OSHA requires employers to identify, evaluate and implement safer needle protection devices such as engineered sharps protections or needleless systems.
NopoGuard is the only reusable, on-syringe sharps safety device that works with existing syringes and needles. It is the perfect solution for recapping and disposal of your dental needles, keeping you, your team, and your patients safe from needlestick injuries.
That's right, NopoGuards are REUSABLE!
Watch this video to learn all the tips and tricks to master the use of NopoGuard in your clinical setting.
Sign up to hear from us about new products, specials, and sales.
Browse the document library and links below
Brochure - Getting to Know NopoGuard (pdf)
DownloadInstructions For Use - Getting Started with NopoGuard (pdf)
DownloadGuide - When to Replace Your NopoGuards (pdf)
DownloadCDC Infection Prevention Dental Settings (pdf)
DownloadNIOSH - Protect Yourself from Needlestick Injuries (pdf)
DownloadSharps Safety Device Evaluation Form - CDC / OSHA (pdf)
DownloadPlease reach out if you cannot find an answer to your question(s) below.
Transmission of bloodborne pathogens from needle stick injuries is a risk for dental health care personnel (DHCP) and patients alike. The CDC recommends technology-based engineering controls as the primary method to reduce exposure to bloodborne pathogens while using needles, during cleanup, and during disposal (Centers for Disease Control and Prevention. Guidelines for infection control in dental health-care settings – 2003. MMWR Recommendations and Reports 2003; Volume 52, No. RR-17, pgs 1-61).
NopoGuard is the first and only on-syringe sharps safety device that is compatible with your existing syringes and needles. There’s no need to adopt new tools or equipment and NopoGuard seamlessly integrates into your existing workflow. Because NopoGuard is at the point of care, it protects you, your team, and your patients from start to finish whenever needles are used. And, it’s reusable, saving you money and reducing waste.
Yes! NopoGuard is considered an engineering control to help prevent exposure to bloodborne pathogens. As a "mechanical device," NopoGuard makes it simple to keep you, your team, and your patients safe from needlestick injuries from start to finish. NopoGuard provides safe, reliable protection without having to manage every needle safety precaution during assembly, use, and disposal with only one hand. Applicable excerpts from 29 CFR 1910.1030 are below.
OSHA's bloodborne pathogens standard prohibits the bending, recapping, or removal of a contaminated needle or other contaminated sharp [29 CFR 1910.1030(d)(2)(vii)(A)]. The standard provides an exception where an, "employer can demonstrate that no alternative is feasible or that such action is required by a specific medical or dental procedure." The standard goes on to provide: "such bending, recapping or needle removal must be accomplished through the use of a mechanical device or a one-handed technique" [29 CFR 1910.1030(d)(2)(vii)(B)].
We evaluated and confirmed the fit and performance of NopoGuard on syringes from almost 20 different manufacturers, including the top sellers from major distributors Henry Schein and Patterson Dental. And, we verified NopoGuard is compatible with standard anesthetic needles (up to 35mm in length) with pre-threaded hubs. We’re confident NopoGuard will fit with your syringes and needles. If it doesn’t, please reach out and we’ll make it right.
Each NopoGuard can be sterilized and reused a minimum of 250 times although many of our customers are reusing their devices hundreds more times before replacing them! As with other reusable equipment, NopoGuards may experience some cosmetic degradation or suboptimal performance over time that would necessitate replacement. The exact life expectancy of your NopoGuards depends on the use, care, and processing of the device. It is important to thoroughly inspect your NopoGuards and ensure they are functioning properly prior to each use (DPL assumes no liability in the case of disregard). There is a handy guide in the Resources section of our website that provides several examples of wear that you can expect to see after repeated sterilization cycles and prolonged use.
NopoGuard is compatible with most cleaning and sterilization processes common in today’s dental offices, clinics, and educational institutions. You can place NopoGuards in Tyvek pouches or cassettes depending on your current practice. Ultrasonic cleaners or automated instrument washers should be used to remove debris and clean NopoGuard. Use with mild detergents and warm water. Do not expose to chemicals. Completely dry NopoGuard before sterilization. Steam sterilize for 3-5 minutes at 132ºC/270ºF or for 15-30 minutes at 121ºC/250ºF. We recommend drying for 15-30 minutes after sterilization cycle is complete.
You can only purchase NopoGuards directly from our website at this time.
For a dental practice that consumes about 1,250 needles per year on average, a single 5-pack of NopoGuards would last for an entire year before needing to be replaced (based on a minimum of 250 sterilization cycles). Typically, our customers order more than what matches 1:1 with their needle usage in order to streamline workflow and limit the need to clean and sterilize NopoGuards throughout the day. These customers order two or three (or more) NopoGuard 5-pks and typically reorder every other year.
Because NopoGuard can be repeatedly sterilized and reused, the per use cost varies based on the replacement interval. Replacing a NopoGuard after 250 sterilization cycles would result in a cost of about $0.15 per patient. That $0.15 per patient cost is based on $189 for a 5-pack of NopoGuards divided by 1,250 needles from the example above (we’ve found that a good proxy for the number of patients in this case is the number of needles you use). Some NopoGuard users replace their devices well beyond 250 sterilization cycles making their per use cost significantly lower (some as low as $0.05).
We want to make sure you’re 100% satisfied with your purchase of NopoGuard. We recommend purchasing a NopoGuard trial pack first to evaluate in your practice, clinic, or educational institution. If you don’t immediately see the value of NopoGuard, please return it for a full refund (less return shipping). Unfortunately, we cannot accept returns for 5-packs of NopoGuard unless you receive product that is defective or damaged.
Yes, NopoGuard is listed with FDA under the product code DZM. NopoGuard underwent extensive testing and simulated clinical use evaluations per ISO 23908 in order to satisfy FDA’s requirements for sharps injury protection.
The need for a better, more reliable, and reusable needle safety device extends beyond our borders. We are working through the regulatory process to make NopoGuard available around the globe. Please check back in for an updated list of countries where NopoGuard is approved for use.
The NopoGuard device, its packaging, and labeling were designed in the United States by Dental Products Lab. All of the packaging and labeling are manufactured in the United States. The raw materials for NopoGuard are purchased domestically and shipped overseas for molding using specialized equipment. The finished, molded components are then assembled and packaged in the United States.
Dental Products Lab (DPL) was founded by a clinical dentist and a medical device engineer looking to continue making a difference in the health care space. They've combined their clinical and engineering expertise to create the smartest new products for the dental industry, to ultimately improve care for patients and dental health care pe
Dental Products Lab (DPL) was founded by a clinical dentist and a medical device engineer looking to continue making a difference in the health care space. They've combined their clinical and engineering expertise to create the smartest new products for the dental industry, to ultimately improve care for patients and dental health care personnel alike.
The entire Dental Products Lab team is dedicated to designing, testing, and manufacturing the highest quality products to improve dental care. So, you’re in good hands; ours at DPL and those of your dental health care personnel using our products.
Shan Gaw
Co-Founder
Shan Gaw has over two decades of engineering and design experience in consumer products and medical devices. Shan spent his early career with a design consultancy working for clients such as Microsoft, Samsung, Starbucks, and Nike. It wasn’t long before he found his passion in medical device, embarking on a 20 year care
Shan Gaw
Co-Founder
Shan Gaw has over two decades of engineering and design experience in consumer products and medical devices. Shan spent his early career with a design consultancy working for clients such as Microsoft, Samsung, Starbucks, and Nike. It wasn’t long before he found his passion in medical device, embarking on a 20 year career working for several medical device startups developing innovative technologies and securing intellectual property as well as designing and helping commercialize a number of Class I, II, and III products. Shan’s depth and breadth of experience extends beyond design and manufacturing to include all aspects of building a business, from raising capital (private markets, institutional investors, and strategic partners) to successful exit (acquisition and IPO). An inventor on more than 30 issued and pending patents throughout his career, Shan is continuing his journey with the start of Dental Products Lab. Shan holds a B.S. in Engineering from Stanford University.
Robert A. Randolph, DDS
Co-Founder
Dr. Bob Randolph has been practicing general dentistry for over 20 years. He is a member of the American Dental Association, California Dental Association, San Diego County Dental Association, and the Spear Education Dental Study Group, and has been a San Diego Magazine ``Top Dentist`` consecutively from 2009-2023. Under his leadership, his private practice has increased productivity 10x over the past 10 years by adopting new technologies, building relationships, and taking a patient-first approach to dental care. Dr. Randolph received his Bachelor of Arts degree in Human Biology from Stanford University and earned his Doctor of Dental Surgery from the University of the Pacific, Arthur A. Dugoni School of Dentistry where he graduated with Tau Kappa Omega Honors and ranked #2 in clinical treatment. Dr. Randolph brings not only proven clinical proficiency and sophisticated business acumen to Dental Products Lab, but also a deep knowledge of dental products, engineering aptitude, and a knack for user-centered design.
Dental Products Lab's advisory board is composed of industry veterans in the fields of dentistry, health care, and business.
Jeff Szekeres
Vice President, Corporate Development - Danaher
Mr. Szekeres is the corporate development lead for the Life Sciences and Diagnostics platforms of Danaher Corporation, focused on acquisitions, divestitures
Dental Products Lab's advisory board is composed of industry veterans in the fields of dentistry, health care, and business.
Jeff Szekeres
Vice President, Corporate Development - Danaher
Mr. Szekeres is the corporate development lead for the Life Sciences and Diagnostics platforms of Danaher Corporation, focused on acquisitions, divestitures, minority investments, and partnerships. He has led over $50B in disclosed and completed M&A deals for Danaher.
George A. Randolph, DDS
General Dentist
Dr. Randolph owned and operated a private family dental practice for almost 40 years. He is renowned and respected for his exceptionally high standards of dental care. He brings a wealth of real world clinical dentistry and practice management experience to the advisory board.
Laura Ingemanson
Vice President, Judith Campbell Educational & Community Foundation
Ms. Ingemanson has an extensive background in account and project management in the hi-tech industry. In addition to volunteering her time as an undergraduate college admissions interviewer, Laura is responsible for working with a number of charitable organizations and educational scholarship candidates.
Can't find what you're looking for or still have questions? Interested in educational discounts or bulk purchase information? Let us know! We will get back to you as soon as possible with an answer.
info@dentalproductslab.com
Dental Products Lab, LLC
Copyright © 2024 NopoGuard - All Rights Reserved.